Weslo CADENCE DL3 User Manual

PROBLEM: The walking belt is off-center
SOLUTION: a. If the walking belt has shifted to the left, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn the right adjustment bolt coun-
terclockwise 1/4 of a turn. Plug in the power cord, in-
sert the key and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
b. If the walking belt has shifted to the right, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn the right adjustment bolt clock-
wise 1/4 of a turn. Plug in the power cord, insert the
key and run the treadmill for a few minutes. Repeat
until the walking belt is centered.
13

Weslo CADENCE DL3 Specifications

General

Brand	Weslo
Model	CADENCE DL3
Category	Treadmill
Language	English