Woodstar sd 16 User Manual

106 pages

To Next Page

To Previous Page

Declaración de conformidad

Porlapresente,Woodster Fabrikation von Holzbearbeitungsmaschinen GmbH, Günz-

burgerStr.69,D89335Ichenhausencerticamosquelasiguiantemáquina,

graciasasuconceptoyconstrucción,aslcomoenlaversiónpuestaencircula-

ciónpornosotros,cumplelosrequeriminientosespecicadosypertinentesde

seguridadyprotecciónsanitariadelasnormativasdelaCEmencionadasabajo.

Encasodeefectuarseunamodicacióndelamáquinasinseracordadacon

nosotros,estadeclaraciónpierdesuvalidez.

Máquina:

Sierra de marquetería

Modelo:

sd 16, Art.-Nr. 390 1401 000, 390 1401 901, 390 1401 902, 390 1401 903

DirectivasCEcorrespondientes

Normativa sobre Maquinaria 98/37/CEE (< 28.12.2009),

Normativa sobre Maquinaria 2006/42/EG (> 29.12.2009),

Normativa sobre baja tensión 2006/95/EWG,

Normativa EMV 2004/108/EWG.

OcinaderegistrosegúnanexoVII:

TÜV Rheinland,

Sicherheit und Umweltschutz GmbH,

D–51101 Köln

Registración:

AM 500390390001

Localidad, Fecha:

Ichenhausen, 04.08.2009

Firma

Thomas Honigmann (managing director)

Declaração de conformidade

A Woodster Fabrikation von Holzbearbeitungsmaschinen GmbH, Günzburger Str. 69,

D-89335 Ichenhausen declara qe a máquina que a seguir se descreve obedece

ásrespectivasexigãnciasbásicasdasseguintesnormasdaUniãoEuropea

respeitantesásegurançaesaúde,devidoásuaconcepçãoefabricobemcomo

presentaçãodomodelopornóspostoemcirculaçãonomercado.

Qualqueralteraçãoàmáquinalevadaacabosemonossoconsentimentoresulta

naperdadevalidadedapresentedeclaração.

Máquina:

Serra de arcos para recortes

Modelo:

sd 16, Art.-Nr. 390 1401 000, 390 1401 901, 390 1401 902, 390 1401 903

DirectivasComunitáriasaplicáveis:

Directiva comunitaria sobre maquinas 98/37/EG (< 28.12.2009),

Directiva comunitaria sobre maquinas 2006/42/EG (> 29.12.2009),

Directiva comunitaria sobre baixa tensão 2006/95/EWG,

Directiva comunitaria sobre compatibilidade electromagnética 2004/108/EWG.

DepartementonoticadosegundoapendiceVII:

TÜV Rheinland,

Sicherheit und Umweltschutz GmbH,

D–51101 Köln

Contratadapar:

AM 500390390001

Data:

Ichenhausen, 04.08.2009

Assinatura:

i.V. Wolfgang Windrich

Questions and Answers:

S
Steven OchoaAug 11, 2025
Why do saw blades break on my Woodstar Saw?
- J
  James JonesAug 12, 2025
  Saw blades may break due to several reasons: * The tension might be incorrectly set. Ensure you set the correct tension. * The load might be too great. Try feeding the workpiece more slowly. * You might be using the incorrect saw blade variety. Make sure you are using the correct saw blades. * The workpiece might not be fed straight. Avoid exerting pressure from the side.
J
Jonathan HigginsAug 18, 2025
How to reduce vibration on my Woodstar sd 16 Saw?
- A
  Angel McbrideAug 18, 2025
  Vibration in your Woodstar Saw can stem from several causes: * The saw might be incorrectly installed. Refer to the instructions for proper installation. * The underlay might be unsuitable. Remember that a heavier workbench reduces vibration. Solid wood vibrates less than plywood. Choose a workbench suited to your needs. * The workbench might not be screwed down or is on the motor. Tighten the locking lever. * The motor might not be secured. Securely screw the motor in place.