37
HARDWARE SETTINGS
The Hardware tab of the Bluetooth Configuration Panel provides basic information about
the Bluetooth hardware installed on this computer and access to the Advanced Settings
dialog box, if required:
• Devices:
§ Name: the name of the device, e.g., WIDCOMM Bluetooth Device
§ Type: the type of device, e.g., USB.
• Device Properties:
§ Device status: indicates that the device is operating properly or that there is a
problem/conflict.
§ Manufacturer: the name of the company that manufactured the device
selected in the Devices section of this dialog box.
§ Firmware Revision: the manufacturer's firmware version number.
§ Device Address: the Bluetooth Device Address (BDA or BD_Addr) assigned
to this device when it was manufactured.
§ HCI Version: the version number of the Bluetooth Specification that the Host
Controller Interface complies with.
§ HCI Revision: the revision number of the Bluetooth Specification that the
Host Controller Interface complies with.
§ LMP Version: the version number of the Bluetooth Specification that the
Link Manager Protocol complies with.
§ LMP Sub Version: the sub-version number of the Bluetooth Specification
that the Link Manager Protocol complies with.
• The Advanced button: displays the Advanced Settings dialog box, which allows
you to select the country code and transmission power settings. This option is not
available on all systems.
To Next Page
Loading...
Need help?
General
