17 18
Troubleshooting
Problems Solutions
The alarm does not sound during a test. Check whether the alarm is properly attached to the mounting
bracket.
Make sure you have pushed the Test button fi rmly.
False alarms are triggered intermittently
when residents are cooking, taking
showers, etc.
Check the location of your alarm (see “Installation Locations”).
Clean the alarm (see “Maintenance”).
LED fl ashes yellow once every 60 seconds
with one beep.
The battery is low. Push Test/Silence button once to silence for 10
hours. Replace the alarm immediately.
LED flashes yellow 1-4 times every 40
seconds with 2 beeps.
The alarm is malfunctioning. Please clean your alarm or push Test/
Silence button once to attempt to reset the unit. If the problem still
occurs, replace the alarm immediately.
LED flashes yellow 2 times every 30
seconds with 2 beeps.
The maximum lifetime (10 years) is reached. Push Test/Silence
button once to silence for 3 days. Replace the alarm immediately.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with Local Authority or retailer for recycling advice.
Manufacturer and Service Information
X-Sense Innovations Co., Ltd.
Address: B4-503-D, Tower B, Kexing Science Park, No. 15 Keyuan Road, Technology Park Community,
Yuehai Avenue, Nanshan District, Shenzhen
Email: support@x-sense.com
To Next Page
Loading...
Need help?
General
