Xblue Networks QB User Manual

XBLUE QB Setup Guide
4/17
Related Documents
This Installation Guide explains the installation of XBLUE QB PBX telephony Server and getting
XBLUE telephones working. The documents below should also be referenced and will aid in specific
programming and user information:
Document
Description
XBLUE QB Series Datasheet
Datasheet for the XBLUE QB Series IP PBX.
XBLUE QB Series Administrator Guide
Refer to this manual for instructions on how to
configure, operate, monitor, and maintain the XBLUE
QBPBX.
XBLUE QB Series Extension User Guide
This extension Users Guide is reference to the
instructions on how to log into the user portal,
configure their account, listen to call recordings,
check voicemail messages, and other extension
related operations.
Before You Start
Before you begin to install your QB PBX server, please check the package contents to verify that
you have received the items below. If there is any problem, please contact your provider.
Package Contents
(1) QB PBX*
(1) Power Adapter*
(1) Network Cable
(2) Telephony Line
(4) Rubber Feet*
(1) Warranty Card
(1) Quick Installation Guide
* Note that the PBX model will vary depending on the package purchased. Note also that “Rubber
Feet” and “Power Adapter” apply only the QB1 PBX server. QB1 & 3 PBX servers include mounting
hardware and power cord.
Online aids
We are continually developing online aids for installation assistance.
Please check our website for updates on a regular basis.
Xblue.com/customer-support-service/qb-support/
You can use your smart phone to scan this URL with a QR Scanner.

Xblue Networks QB Specifications

General

Brand	Xblue Networks
Model	QB
Category	Server
Language	English