12
SPECIFICATION
REPAIR AND MAINTENANCE
XDEEP BCDs does not contain any elements which can be
repaired by the user, and so all repairs (including lubrica-
tion or replacement of worn-out elements) should be
performed only by trained technicians holding certicates
issued by the producer (authorized service center).
For repair of XDEEP BCDs, only elements and spare parts
supplied by the producer must be used. Elements and
spare parts from other sources, although identical by
all appearances, may have slightly dierent properties,
which may negatively aect the working life of the BC.
The only maintenance procedure which may be per-
formed by the user is rinsing the BC in fresh water. It is
recommended after diving in salt or chlorinated water.
On no account should detergents, cleaning agents or sol-
vents be used for cleaning the BC. In case of heavy soil,
contact the producer for additional information.
WARNING
FOR SAFETY REASONS, THE BC SHOULD BE
OVERHAULED AFTER EVERY 200 DIVES, HOWE-
VER NOT LESS FREQUENTLY THAN ONCE A YEAR.
SUCH OVERHAUL SHOULD BE PERFORMED BY AN
AUTHORISED XDEEP SERVICE CENTRE.
34
To Next Page
Need help?
General
