PRINT OPTIONS
17
Additional information
The following sections provide additional information about print options. For more
information about the settings, requirements, and constraints in effect for these options, see
“Print options and settings” on page 9.
Booklet Maker
Use this option to arrange the pages of your print job in special layouts for folding or cutting
after printing.
NOTE: Custom Paper Sizes are not supported when creating a booklet.
Off: The job is printed without any booklet imposition features.
Saddle: Choose this setting to print entire documents that are folded and stacked in booklet
order. Finished pages can be stapled or stitched across the center fold, or spine.
You can also use Creep to adjust the image shifting that may occur when you print booklet
jobs. For more information, see “Centering Adjustment” on page 19.
Saddle (Right Binding): This option is the same as Saddle, except that the page order sequence
is right to left.
Perfect: Choose this setting to print separate folded pages that are stacked in booklet order.
Finished pages are stitched adjacent to one another for trimming or gluing.
Perfect (Right Binding): This option is the same as Perfect, except that the page order
sequence is right to left.
Saddle Booklet
Front Back
Perfect Booklet
Front Back
To Next Page
Loading...
Need help?
General