XEROX C8000
Powering OFF and ON
The following Power Off options are available:
Sleep: Sleep Mode is a power saving state that extends the device’s energy saving capability.
Restart: The device restarts. Any jobs in progress are deleted.
Power Off: The device powers off. Any jobs currently in the print queue are deleted.
Cancel: Power off options are cancelled and the device is available for use.
Any jobs in the queue are retained.
1. Powering Off:
Press the Power button.
NOTE: It is advisable to leave the device powered
ON at all times, but it may be necessary to
power off the device for example if a
problem occurs or to move the device.
2. Powering On
1. Open the front cover,
2. Press the switch ON the [right hand side of the
MFP]
3. Close the front cover.
4. Press the Power button located on the Control Panel.
5. The device powers up and is ready to print, scan or copy (Standby Mode).
Low Power Mode:
To reduce energy consumption, the device is pre-set at the factory to enter a Low Power Mode.
The Power button is illuminated when the device is in Low Power Mode.
To re-activate the device from Low Power Mode, press the Power button.
To Next Page
Loading...
Need help?
General
