Xerox D110 Supplementary Guide

Xerox
®
D95/D110/D125 Copier/Printer Security Function Supplementary Guide 23
Set S/MIME
Note: To use E-mail with this machine, the E-mail function needs to be enabled and configured
as described in the System Administrator Guide’s "Scan to E-mail."
Before making the S/MIME setting, you need to import an S/MIME certificate according to the
same procedure as that in "Configuring Machine Certificates."
1. Click [Configuration Overview] on the [Properties] screen.
2. Click [Settings] for [E-mail].
3. Click [Configure] for [E-mail Settings], and enter the machine’s E-mail address in the [From
address] box.
4. Click [Apply].
5. Click [Security] on the [Properties] screen.
6. Click [Certificate Management].
7. Select [S/MIME] for [Certificate Purpose].
8. Click [Display the list], and check a desirable certificate.
9. Click [Certificate Details].
10. Click [Use this certificate].
11. Click [SSL/TLS Settings].
12. Check the [Enabled] box for [S/MIME Communication].
13. Click [Apply].
14. Click [Reboot Machine].
After the machine is restarted, refresh the browser and click the [Properties] tab.
15. Click [Security].
16. Click [S/MIME Settings].
17. Uncheck the [Enabled] check box for [Receive Untrusted E-mail].
18. Select [Always add signature] for [Digital Signature - Outgoing E-mail].
19. Click [Apply].
Set Browser Refresh
1. Click [General Setup] on the [Properties] screen.
2. Click [Internet Services Settings].
3. Enter the “0” in the [Auto Refresh Interval] box.
4. Click [Apply].

Xerox D110 Specifications

General

Brand	Xerox
Model	D110
Category	Printer
Language	English