Xerox DocuMate 4790 Features Guide

Xerox DocuMate 4790 and 4799
TWAIN Features Guide
15
2
Accessing the TWAIN
Interface from FreeFlow
Makeready
The instructions in this guide presuppose that FreeFlow Makeready is already installed on your computer.
Installation of FreeFlow Makeready is outside the scope of this document.
Tip: sometimes using USB ports on the front of the computer, USB hubs, or USB cables longer than 6 feet can cause
communication issues with the scanner and should be avoided if possible.
Tec hnical No te
To select the TWAIN source in FreeFlow Makeready, the application must already be configured to see and use a
TWAIN scanner driver. If you do not see the TWAIN drivers in the Select Source list, you may need to manually
configure the application to access the TWAIN scanner. The instructions below should only be followed by advanced
users or system integrators as you will be modifying the Windows registry.
To configure it manually, follow these steps:
1. Run regedit as an administrator
2. Browse to: HKEY_LOCAL_MACHINE\SOFTWARE\Xerox\Documents On Demand\CurrentVersion\Installation
3. Set ScannerSelection to 0

Xerox DocuMate 4790 Specifications

General

Film scanning	No
Color scanning	Yes
Duplex scanning	-
Input color depth	24 bit
Maximum scan size	297 x 432 mm
Enhanced scan resolution	300 x 300 DPI
Optical scanning resolution	600 x 600 DPI
Display	LCD
Scanner type	Flatbed & ADF scanner
Product color	Blue, White
Sensor type	CCD
Daily duty cycle (max)	10000 pages
Auto document feeder (ADF) input capacity	200 sheets
Minimum scan area (ADF)	48 x 70 mm
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	75 - 80 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	2048 MB
Minimum processor	Intel® Pentium® 4
Minimum storage drive space	350 MB
Compatible operating systems	Windows 7 Windows Vista Windows XP
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	444 mm
Width	468 mm
Height	339 mm
Weight	18000 g