DocuMate 765 Scanner User’s Guide 5
Installation
Step 1: Unpack and Assemble the Scanner
Use care when unpacking, moving and assembling the scanner. Follow
these instructions to prevent injury and damage to the scanner.
• Always have at least two people carry the scanner, lifting the scanner
up from underneath.
• Keep at least 15 inches of space on every side of the scanner for the
input and exit tray extensions, performing maintenance, and to have
sufficient air flow for ventilation.
• Use a desk or table that can support the weight of the scanner, do not
place the scanner on a cloth covered surface.
Unpack the scanner:
1. Remove the scanner from the shipping box, verify all parts listed on
page 1 are in the box.
We recommend that you keep the original packing materials in case
you need them later.
2. Place the scanner on a level surface near the computer.
3. Remove all shipping tape from the top and side of the scanner.
Attach the input tray:
1. Align the holes on the input tray arms with the pins on the scanner.
2. Insert the pin on the left side of the scanner into the hole on the left
input tray arm.
3. Apply slight pressure to the right arm of the input tray and insert the
pin on the scanner into the hole in the tray arm.
To Next Page
Loading...
Need help?
General