Xerox DocuPrint 3055 Quick Reference Guide

38 4 Paper
3. Load the paper with the print side facing
down.
4. Adjust the paper guides to the size of the
paper.
Important
• Make sure that the guides are positioned just lightly
against the paper. The guides that are too tight or too
loose can cause paper jams.
Note
• Do not fill paper above the maximum fill line. Doing so
can cause paper jams.
Note
• When printing from the bypass tray, set the size and
type of the paper on your print driver. For more
information, refer to the online help provided for the print
driver.
• When [Bypass Mode] is set to [Panel Specified] (default:
[DriverSpecified]) on the control panel, or when [Paper
Size] is set to an option other than [Driver] (default), set
the size and type of the paper loaded in the bypass tray
before requesting a print job.
The printer prints your job only when the settings on
your print driver match the settings on the control panel.
Feed Orientations for Envelopes in the
Bypass Tray
When loading envelopes in the bypass tray, be
sure to load them in the correct orientations.
Important
• For best print quality, do not use envelopes that:
- are curled or twisted.
- are stuck together or damaged.
- have windows, holes, perforations, cutouts, or
embossments.
- use tie strings, metal claps, or metal folding bars.
- have postage stamps attached.
- have any exposed adhesive when the flaps are in the
sealed position.
- have deckle edges or creased corners.
- have rough, cockled, or laid finishes.
Envelopes with Adhesive Flaps
Example) Youkei 4
Load envelopes with the address
side facing down and the edge with
the flaps on your right. Make sure
that the flaps are closed.
Envelopes with Non-adhesive
Flaps
Example) Choukei 3
Load envelopes with the address
side facing down and the edge with
the flaps on your right. Make sure
that the flaps are opened.

Xerox DocuPrint 3055 Specifications

General

Brand	Xerox
Model	DocuPrint 3055
Category	Printer
Language	English