Scanner Setup Xerox
®
Duplex Portable Scanner
User Guide 9
Note: Only use the USB power cable included with your scanner. Connecting any other type of
USB power cable may damage your scanner, and will void its warranty. If you do not have your
USB power cable, you can order a new one by contacting our Customer Service department.
Please refer to the Technical Support Card, included with your scanner, for our company contact
information, or visit the Parts & Accessories page for your scanner at www.xeroxscanners.com
.
Safety Lock
Your scanner may have a slot for installing a Kensington® style safety lock. This slot can be
identified by the lock icon. It is to the left of the USB port on the scanner. When following the
instructions in this document, make sure you connect the USB cable into the USB port which is
identified by the USB symbol.
A lock is not provided with the scanner and this document does not contain instructions on
purchasing and installing a safety lock. If you choose to use a safety lock, please carefully read the
installation instructions provided with the lock. More information about Kensington® locks can be
found at www.kensington.com
.
Use this slot to install a
safety lock. Do not
attempt to insert any
other type of object.
To Next Page
Loading...
Need help?
General