Xerox Phaser 3020BI User Manual

IP Filtering
Xerox® Phaser® 3020
User Guide
78
4. Enter the IPv6 address in the form of a CIDR convention. Prefix indicates the number of leftmost
bits to be referenced.
For example:
2001:DB8:1234:215:215:99FF:FE04:D345 / 128 is used to reference a complete address.
2001:DB8:1234:215:215:99FF:FE04:D345 / 64 is used to reference prefix address consisted of
leftmost 64 bits only.
2001:DB8:1234:215:215:99FF:: / 80 is used to reference prefix address consisted of leftmost 80
bits only.
5. The ability to filter on a port or ports is also supported. Enter the port information.
6. Click Apply to accept changes.
7. Select OK when the acknowledgement message displays.
Enable MAC Filtering
1. Select MAC Filtering in the directory tree. The MAC Filtering page displays.
2. Select the MAC Filtering Enable check box.
3. In the MAC Address to Filter Out area, select Add.
4. Enter the MAC Address that you want to filter out.
5. Select Apply to save the changes.
6. Select OK when the acknowledgement message displays.

Xerox Phaser 3020BI Specifications

General

Brand	Xerox
Model	Phaser 3020BI
Category	Printer
Language	English