3-6
Disassembly and Reassembly
Service Manual
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 3-2)
- Fuser Connector(see page 3-3)
2. Remove the fourteen screws securing from the
Engine Shield Ass’y and unplug the all connec-
tors. Then take the Engine Shield Ass’y.
3.8 Engine Shield Ass’y
3.9 Main PBA
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 3-2)
- Engine Shield Ass’y(see page 3-6)
2. Unplug one connector and remove five screws
from the Main PBA. Then lift the Main PBA out,
as shown below.
To Next Page
Loading...
Need help?
General