S
ETTING
U
P
Y
OUR
P
RINTER
2.10
Using a USB Cable
Note: Connecting the printer to the USB port of the computer
requires a certified USB cable.
1
Make sure that both the printer and the computer are
turned off.
2
Plug the USB printer cable into the connector on the back of
the printer.
3
Connect the other end of the cable to the USB port on your
computer.
See your computer User’s Guide if you need help.
Note: For using a USB cable, you must be running Windows 98/
Me/2000/XP. In Windows 98/Me, you must install the USB driver
to add the USB port. See page 2.15.
To the USB port on
your computer
To Next Page
Need help?
General