Xerox Phaser 3121 User Manual

U SING P RINT M ATERIALS
3.8
Using the Manual Feeder
If you select Manual Feed in the Source option, you can
manually load paper in the manual feeder. Manually loading
paper can be helpful when you want to check the print quality
after each page is printed.
If you experience a paper jam from the tray, load one sheet of
paper at a time into the manual feeder.
1 Load the print material in the manual feeder with the print
side up.
Adjust the paper guide against the print material without
bending the paper.
2 When you print a document, you must select Manual Feed
for Source from the software application, and then select
the correct paper size and type. For details, see page 4.6.
3 Press the button on the printer to start feeding.
4 Printing is started.
5 If you are printing multiple pages, load the next sheet after
the first page prints out, and press the button.
Repeat this step for every page to be printed.

Xerox Phaser 3121 Specifications

General

Brand	Xerox
Model	Phaser 3121
Category	Printer
Language	English