Xerox Phaser 3330 User Manual

To install the print driver software:
1. Insert the Software and Documentation disc into the appropriate drive on your
computer.
2. To view the .dmg file for your printer, double-click the disc icon.
3. Open the .dmg file, then navigate to the appropriate installer file for your operating
system.
4. To begin installation, open the Installer package file.
5. To acknowledge the warning and introductory messages, click Continue. Click
Continue again.
6. To accept the license agreement, click Continue, then click Agree.
7. To accept the current installation location, click Install, or select another location for
the installation files, then click Install.
8. Enter your password, then click Install Software.
9. Select your printer in the list of discovered printers, then click Continue. If your printer
does not appear in the list of discovered printers:
a) Click the Network Printer icon.
b) Type the IP address of your printer, then click Continue.
c) Select your printer in the list of discovered printers, then click Continue.
10. To accept the print queue message, click Continue.
11. To accept the installation success message, click Close.
12. To verify that the print driver recognizes the installed options:
a) From the Apple menu, click System Preferences > Printers and Scanners.
b) Select the printer from the list, then click Options & Supplies.
c) Click Options.
d) Confirm that all of the options installed on the printer appear correct.
e) If you change settings, click OK, close the window, then exit System Preferences.
Xerox
®
Phaser
®
3330 Printer3-8
User Guide
Installation and Setup

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English