Xerox PHASER 3435 User Manual

Installing Printer Software in Windows
7
Installing Software for Network Printing
When you connect your printer to a network, you must first
configure the TCP/IP settings for the printer. After you have
assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.
You can install the printer software using the typical or custom
method.
Typical Installation
This is recommended for most users. All components necessary
for printer operations will be installed.
1 Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
2 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click
Start and
then
Run . Type X:\Setup.exe , replacing “ X ” with the
letter which represents your drive and click
OK .
If you use Windows Vista, click
Start → All programs →
Accessories → Run , and type X:\Setup.exe .
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and
click
Continue in the User Account Control window.
3 Click Install Software .
4 Select Typical installation for a network printer . Click
Next .
5 The list of printers available on the network appears. Select the
printer you want to install from the list and then click
Next .
• If you do not see your printer on the list, click Update to
refresh the list, or select
Add TCP/IP Port to add your
printer to the network. To add the printer to the network,
enter the port name and the IP address for the printer.
To verify your printer’s IP address or the MAC address, print
a Network Configuration page.
• To find a shared network printer (UNC Path), select
Shared
Printer [UNC]
and enter the shared name manually or find
a shared printer by clicking the
Browse button.
NOTE : If you cannot find your machine in network, please turn
off the firewall and click
Update .
For Windows operating system, click
Start → Control Panel
and start windows firewall, and set this option unactivated. For
other operating system, refer to its on-line guide.
6 After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click Next .
Otherwise, just click Next and skip to step 8.
7 If the test page prints out correctly, click Yes .
If not, click No to reprint it.
8 Click Finish .

Xerox PHASER 3435 Specifications

General

Color	No
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Internal memory	64 MB
Sound power level (standby)	25 dB
Total input capacity	300 sheets
Total output capacity	150 sheets
Maximum input capacity	550 sheets
Media weight (tray 1)	60 - 163 gsm
Paper tray media types	Envelopes
Non-ISO print media sizes	Executive (184 x 267mm), index card, Letter (media size), Legal (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Network ready	Yes
Authentication method	IP filtering, 802.1x
Power consumption (active)	526 W
Maximum operating temperature range (T-T)	10 - 32 °C
Maximum duty cycle	80000 pages per month
Power consumption (standby)	36 W
Power consumption (PowerSave)	11 W
Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	20 - 80 %
Certification	CB Report (IEC 60950-1/EN 60950-1), Certified to UL 60950-1/CSA 60950-1-03, 1st Edition, CE Marked, EMC Directive 2004/108/EC, FCC Part 15, Class B, Low Voltage Directive 2006/95/EC, R&TTE Directive 1999/5/EC, RoHS Directive 2002/95/EC