EasyManuals Logo
Home>Xerox>Printer>Phaser 5550

Xerox Phaser 5550 User Manual

Xerox Phaser 5550
237 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Windows 2000 or Later
Phaser® 5550 Printer
3-18
Windows 2000 or Later Troubleshooting
Note: For Windows XP, select Classic Look or the Windows XP procedures will not match
the steps below. To select Classic Look, click Start, click Control Panel, and then Taskbar
and Start Menu. Select the Start Menu tab, and then select Classic Start menu. Click OK.
This Troubleshooting section assumes you have completed the following tasks:
Loaded a Phaser printer PCL or PostScript printer driver.
Printed and kept a current copy of the Configuration page.
Verifying Settings
To verify settings:
1. Verify the settings on the Configuration page.
IP Address Source is set to: DHCP, Control Panel, BOOTP, or Auto IP (depending
on your network configuration).
Current IP Address is set correctly. (Note this address if it is assigned by Auto IP,
DHCP, or BOOTP.)
Subnet Mask is set correctly (if used).
Default Gateway is set correctly (if used).
LPR is enabled. Verify that the LPR and AppSocket settings are set as desired.
Interpreters: Auto, PCL, or PostScript (depending on your driver).
2. Verify that the client is logged into the network and printing to the correct print queue.
The user should also have access to the Phaser printer queue.
Verifying Driver Installation
To verify driver installation:
1. Right-click My Network Places on the desktop, and then click Properties.
2. Right-click Local Area Connection, and then click Properties.
3. Select the General tab. View the list of installed network protocols to verify that TCP/IP
is installed. (For more information, contact your network administrator.)
4. Click Install to install any components not listed, and then restart your computer.
5. Click Start, click Settings, and then click Printers.
6. Right-click the printer icon, and then click Properties.
7. Select the Advanced tab. Verify that the correct printer driver is installed.
8. Select the Ports tab. Verify that the IP Address in the Print to the Following Ports list is
identical to the one on the Configuration page. You may need to click the
Configure Port button to see the IP address. If necessary, re-select the TCP/IP number
used for the printer.

Table of Contents

Other manuals for Xerox Phaser 5550

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 5550 and is the answer not in the manual?

Xerox Phaser 5550 Specifications

General IconGeneral
ColorNo
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Warm-up time (from sleep mode)37 s
Time to first page (black, normal)6.5 s
Print speed (black, normal quality, A4/US Letter)50 ppm
Storage mediaHDD
Internal memory256 MB
Maximum internal memory1024 MB
Internal storage capacity40 GB
Sound power level (standby)5 dB
Sound pressure level (printing)7.19 dB
Total input capacity1100 sheets
Maximum input capacity4100 sheets
FunctionsPrint
I/O portsParallel (IEEE 1284), USB 2.0
Device managerDHCP, PrintingScout Alert Notification, Xerox CentreWare Internet Services Embedded Web Server, Xerox CentreWare Printer Management for Microsoft, Novell, and UNIX
Package length833.11 mm
Power requirements240 V, 50/60 Hz
Networking features10/100BaseTX Ethernet
Wireless technologyIEEE802.11a/b/g
Storage temperature (T-T)41 - 90 °F
Power consumption (active)900 W
Compatible operating systemsHP-UX 10.2, Linux, Mac OS X 10.2, Novell NetWare 4.x, Red Hat 9, SCO, SUSE 9, Solaris 2.5.1/2.6+, Windows 2000/Vista, Xerox Walk-Up PD
Duty cycle letter size (maximum)300000 pages per month
Acoustic power emissions (standby)50 dB
Standard output capacity for envelopes500 sheets
Non-operating relative humidity (non-condensing)15 - 85 %
Acoustic power emissions (active, print, copy or scan)71.9 dB
PCL fonts83
CertificationCE, UL 60950-1/CSA 60950-1-03, FCC Part 15 Class A, 73/23/EEC, RoHS 2002/95/EC
Country of originChina
Maximum duty cycle50000 pages per month
Number of PostScript fonts139
Sustainability certificatesENERGY STAR
Power consumption (standby)11 W
Power consumption (PowerSave)105 W
Paper tray media typesBond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Export Control Classification Number (ECCN)EAR99
Weight and Dimensions IconWeight and Dimensions
Height749.29 mm
Package weight65772 g
Dimensions (WxDxH)1380 x 650 x 1050 mm

Related product manuals