Xerox Phaser 6125 User Manual

Printing Custom Size
Phaser® 6125 Color Laser Printer
4-31
Printing Custom Size
This section explains how to print on custom size paper, such as long paper using the print
driver.
Custom size paper can be loaded in each tray. The way to load custom size paper in the paper
tray is the same as the one to load standard size paper.
See also:
Loading Paper in the Manual Feed Slot on page 4-12
Loading Paper in the Paper Tray on page 4-8
Setting Paper Types and Sizes on page 4-7
Defining Custom Paper Sizes
Before printing, set the custom size on the print driver.
Note: When setting the paper size on the print driver and control panel, be sure to specify the
same size as the actual paper used. Setting the wrong size for printing will cause printer
failure. This is especially true if you configure a bigger size when using a narrow width paper.
Using the Driver
On the print driver, set the custom size in the Custom Paper Size dialog box. This section
explains the procedure using Windows XP as an example.
For Windows 2000 or later, an administrator’s password only allows users with administrator
rights to change the settings. Users without the rights of administrator can only check the
contents.
When configuring the Custom Paper Size dialog box in Windows 2000 or later, settings of
other printers on the computer will also be affected as the form data base of the computer is
used by a local printer. For a shared printer on the network, settings of other shared printers on
the same network in another computer will also be affected as the form data base on the server
with existing print queue is used.
1. From the Start menu, click Printers and Faxes, and then display the properties of the
printer to be used.
2. Select the Configuration tab.
3. Click the Custom Paper Size button.
4. Use the Details list box to select the custom setup you want to define.
5. Specify the length of the short edge and long edge under Setting For. You can specify the
values either by entering them directly or using the Up Arrow and Down Arrow buttons.
The length of the short edge cannot be longer than the long edge, even if it is within the
specified range. The length of the long edge cannot be shorter than the short edge, even if
it is within the specified range.

Xerox Phaser 6125 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	17 s
Time to first page (color, normal)	14 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Print speed (color, normal quality, A4/US Letter)	12 ppm
Internal memory	64 MB
Sound power level (standby)	25.7 dB
Sound pressure level (printing)	51.6 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Media weight (tray 1)	64 - 220 gsm
Paper tray media types	Envelopes, Glossy paper, Labels, Plain paper
Non-ISO print media sizes	Letter
Multi-Purpose Tray media weight	64 - 164 g/m²
Power requirements	240 V, 50/60 Hz
Networking features	10/100BaseTX
Power consumption (active)	280 W
Maximum duty cycle	40000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	50 W
Power consumption (PowerSave)	5 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	15 - 85 %
Certification	CE, UL 60950-1/CSA 60950-1-03, EMC 89/336/EEC, FCC 15 B, 73/23/EEC, 2002/95/EC

Weight and Dimensions

Dimensions (WxDxH)	400 x 394 x 389 mm