Xerox Phaser 6125 User Manual

Description of Menu Items
Phaser® 6125 Color Laser Printer
5-7
Network Setup
Specifies printer settings affecting jobs sent to the printer through a network port.
■ The settings in the Network Setup menu cannot be set when entering this menu during
printing.
■ You need to restart the printer to activate the new settings. After making the settings, turn
off the printer and then turn it on again.
Item Description
Ethernet Specifies the communication speed and the modes of Ethernet.
■ Auto (default)
Automatically changes between 10M Half Duplex, 10M Full Duplex, 100M
Half Duplex, and 100M Full Duplex.
■ 10M Half Duplex
■ 10M Full Duplex
■ 100M Half Duplex
■ 100M Full Duplex
TCP/IP Specifies the settings to use the TCP/IP protocol.
Get IP Address Specifies whether to automatically or manually retrieve the IP address.
■ DHCP/Autonet (default)
Automatically sets the IP address.
■ BOOTP
Uses BOOTP to set the IP address automatically.
■ RARP
Uses RARP to set the IP address automatically.
■ DHCP
Uses DHCP to set the IP address automatically.
■ Panel
You can set the IP address manually by entering it on the operator panel.
IP Address,
Network Mask,
Gateway
Address
These items are used to check the addresses that have been obtained
automatically or to specify addresses manually. Enter the address in the format
of xxx.xxx.xxx.xxx. You can specifies values in the range of 0 to 255 for xxx.
■ To set addresses manually, set the Get IP Address to Panel.
■ IP addresses are managed in the entire network. An incorrect IP address
may affect the whole network. For the addresses you need to set manually,
contact your network administrator.
Protocol Set Enable when using the protocol. When Disable is selected, the protocol
cannot be activated.
■ LPR (default: Enable)
■ Port 9100 (default: Enable)
■ FTP (default: Enable)
■ SNMP (default: Enable)
■ Email Alerts (default: Enable)
■ CentreWare IS (default: Enable)

Xerox Phaser 6125 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	17 s
Time to first page (color, normal)	14 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Print speed (color, normal quality, A4/US Letter)	12 ppm
Internal memory	64 MB
Sound power level (standby)	25.7 dB
Sound pressure level (printing)	51.6 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Media weight (tray 1)	64 - 220 gsm
Paper tray media types	Envelopes, Glossy paper, Labels, Plain paper
Non-ISO print media sizes	Letter
Multi-Purpose Tray media weight	64 - 164 g/m²
Power requirements	240 V, 50/60 Hz
Networking features	10/100BaseTX
Power consumption (active)	280 W
Maximum duty cycle	40000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	50 W
Power consumption (PowerSave)	5 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	15 - 85 %
Certification	CE, UL 60950-1/CSA 60950-1-03, EMC 89/336/EEC, FCC 15 B, 73/23/EEC, 2002/95/EC

Weight and Dimensions

Dimensions (WxDxH)	400 x 394 x 389 mm