Xerox Phaser 6125 User Manual

Color Registration
Phaser® 6125 Color Laser Printer
6-7
Determining Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan) pattern, find the
values of the straightest lines.
When “0” is the value nearest the straightest line, you do not need to adjust the color
registration. When the value is not “0”, follow the procedure outlined in “Entering Values”.
Note: You can also use the densest colors of the grid to find the straightest lines. The colors
printed at the highest density are those next to the straightest lines.
Entering Values
Using the control panel, enter the values that you found in the Color Registration Correction
Chart to make adjustments.
1. Press the Menu button to display the
Menu screen.
2. Press the Up Arrow or Down Arrow button until
Admin Menu is displayed, then press
the Forward Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until
Maintenance Mode is displayed, then
press the Forward Arrow or OK button.
4. Press the Up Arrow or Down Arrow button until
Adjust ColorRegi is displayed, then
press the Forward Arrow or OK button.
5. Press the Up Arrow or Down Arrow button until
Enter Number is displayed, then press
the Forward Arrow or OK button.
6. Press the Up Arrow or Down Arrow button until you reach the value displayed on the
chart.
7. Press the Forward Arrow button once and move the cursor to the next value.
8. Repeat steps 6 and 7 to continue adjusting the color registration.
9. Press the OK button twice. The Color Registration Correction Chart is printed with the
new values. When printing is finished, the print screen is displayed again.
10. Color registration adjustment is complete when the straightest Y (yellow), M (magenta),
and C (cyan) lines are next to the “0” line.
If “0” is not next to the straightest lines, determine the values and adjust again.
Note: After printing the Color Registration Correction Chart, do not turn off the printer until
the printer motor has stopped running.

Xerox Phaser 6125 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	17 s
Time to first page (color, normal)	14 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Print speed (color, normal quality, A4/US Letter)	12 ppm
Internal memory	64 MB
Sound power level (standby)	25.7 dB
Sound pressure level (printing)	51.6 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Media weight (tray 1)	64 - 220 gsm
Paper tray media types	Envelopes, Glossy paper, Labels, Plain paper
Non-ISO print media sizes	Letter
Multi-Purpose Tray media weight	64 - 164 g/m²
Power requirements	240 V, 50/60 Hz
Networking features	10/100BaseTX
Power consumption (active)	280 W
Maximum duty cycle	40000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	50 W
Power consumption (PowerSave)	5 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	15 - 85 %
Certification	CE, UL 60950-1/CSA 60950-1-03, EMC 89/336/EEC, FCC 15 B, 73/23/EEC, 2002/95/EC

Weight and Dimensions

Dimensions (WxDxH)	400 x 394 x 389 mm