Troubleshooting
126 Phaser 7800 Color Printer
User Guide
5. To release paper that is inaccessible, or if the control panel displays a message to do so, turn knob 2c
in the direction shown.
6. Carefully remove the paper.
Note: If the paper is torn, remove all torn pieces from the finisher.
7. Push lever 2a to its original position until it clicks in place.
8. Close the finisher front door.
Clearing Jams at 2b in the Finisher
1. Open the finisher front door.
To Next Page
Loading...
Need help?
General