Xerox Phaser 860 Networking Setup Guide

6 Phaser 860 Color Printer
Novell NetWare
Novell NetWare
Configuration Software for NetWare Networks
The Configuration Page reports information that you need for NetWare configuration. For
information on printing a Configuration Page, see page 2.
On the Configuration Page, all zeros in one or more of the IPX Networks fields indicates
that the printer does not recognize the network connection; this probably indicates a faulty
cable connection, an incorrect frame type, or Reply to Get Nearest Server has not been set
to On. It must be set to On for at least one file server or router on the same segment as the
printer.
For Windows environments, the following software is available:
■
CentreWare DP—Use this application to configure the printer and the network when
using NetWare 3.x, 4.x and 5.x. Refer to the Printer Management Software CD-ROM
for the CentreWare DP software and documentation.
■
Novell NWAdmin—Use this utility to manage existing queues on networks running
NetWare 4.x or 5.x in NDS or NDPS/NEPS mode.

Xerox Phaser 860 Specifications

General

Brand	Xerox
Model	Phaser 860
Category	Printer
Language	English