Xerox
®
W130 / W110 Scanner Scanner Options, Maintenance and Troubleshooting
6-16 User Guide
Stapled Document
Detected
Either the page
bent when it was
picked up from the
input tray, or the
page skewed
greatly as it was
pulled into the
scanner.
Remove the staples from the
document.
Open the scanner, remove the pages,
then close the scanner. Check all
documents and remove any staples.
Restack the paper in the ADF and
click rescan.
USB Disconnected
The USB is
disconnected from
the scanner or the
PC.
Verify that the USB cable is securely
plugged into the scanner and
computer.
Tray Not Open
Input tray has not
been opened.
Open the input tray.
Tray Lock
This error means
that the tray is
stuck and cannot
be moved. It
usually happens
when the gears
and motors need
to be repaired.
Turn off the scanner. Contact
Technical Support and send the
scanner for repair.
ERROR IMAGE CAUSE RESOLUTION
To Next Page
Loading...
Need help?
General
