Xerox WorkCentre 3119 User Manual

Using Your Printer with a Macintosh
27
7 Using Your Printer with
a Macintosh
Your printer supports Macintosh systems with a built-in USB
interface or 10/100 Base-TX network interface card. When you
print a file from a Macintosh computer, you can use the CUPS driver
by installing the PPD file.
N OTE : Some printers do not support a network
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User’s Guide.
This chapter includes:
• Installing Software for Macintosh
• Setting Up the Printer
•Printing
•Scanning
Installing Software for
Macintosh
The CD-ROM that came with your printer provides you with the
PPD file that allows you to use the CUPS driver or Apple
LaserWriter driver (only available when you use a printer
which supports the PostScript driver)
, for printing on a
Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
Verify the following before you install the printer software:
Item Requirements
Operating System Mac OS 10.3.x or higher
RAM 128 MB
Free Disk Space 200 MB
Install the Printer driver
1 Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2 Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3 Double-click CD-ROM icon that appears on your
Macintosh desktop.
4 Double-click the MAC_Installer folder.
5 Double-click the MAC_Printer folder.
6 Double-click the Xerox MFP Installer_OS X icon.
7 Enter the password and click OK .
8 The Xerox SPL Installer window opens. Click Continue and
then click
Continue .
9 Select Easy Install and click Install .
10 After the installation is finished, click Quit .
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if
installation fails.
1 Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2 Double-click CD-ROM icon that appears on your
Macintosh desktop.
3 Double-click the MAC_Installer folder.
4 Double-click the MAC_Printer folder.
5 Double-click the Xerox MFP Installer_OS X icon.
6 Enter the password and click OK .
7 The Xerox SPL Installer window opens. Click Continue and
then click
Continue .
8 Select Uninstall and then click Uninstall .
9 When the uninstallation is done, click Quit .

Xerox WorkCentre 3119 Specifications

General

Brand	Xerox
Model	WorkCentre 3119
Category	All in One Printer
Language	English