Xerox XC351 User Manual

Making
Copies on the XC351
The Auto
Start feature
allows
you
to
program
the copier while it is warming
up. You can
select the exposure setting, insert
a
sheet
of
paper,
and walk
away from
the copier. Copying will
start automatically as soon
as
the
copier is warmed
up.
1. Turn
the
power
on.
2. Open the
document cover.
3.
Place
the originalface
down, between the
marks, in
the upper
right
corner of
the
document
glass.
4.
Set the
paper
guide
to the width of the
copy
paper.
Insert
a sheet
of
copy
paper
into the
paper
feed
slot.
.
Copying will
start automatically.
.
Approximately
90 seconds after
the last
copy is made
the copier enters
the auto
power
saver
mode
and
the
Ready
indicator
starts flashing.
Copying is
possible
in the Auto Power
Saver Mode,
but
the first copy may
take a few
seconds
longer
than usual.
Remove
the copies
one at a
time.
.
Wait for
the
ready
indicator
to light
before inserting
the next
sheet of
copy
paper.
.
Approximately
1 minute
after
the last
copy is made,
the exposure
setting will
return
to the
auto mode.
6.
13

Xerox XC351 Specifications

General

Brand	Xerox
Model	XC351
Category	Copier
Language	English