Xerox XC351 User Manual

Setting Copy
Exposure Range
The
copy exposure range
may
be adjusted
when
the copy
image
is
consistently too dark or too
light.
The Exposure button and the indicators
on
the control
panel
are
used to enter and select the long term
copy
density
changes.
The new copy exposure range will remain
set untilthis
.
process
is
used again.
R*-ol
@B-ol
FB*-d
Note: In
the
following
procedure,
it is impoftant
to complete step 2
immediately after
completing step
1,
as
the
copier
will
time out in
approximately 10
seconds and
return
to the
ready mode.
Select the Light
mode when
the majority of the
originals have a dark background or are
photographs.
Select
the Auto mode for normal everyday
copying
(many
different kinds of originals).
Select
the Dark mode when the majority
of originals
have
light
printed
areas, such as
pencil
lines.
1. Press
and
hold
the Exposure
button
until the indicator for the
current
exposure setting
starts to
flash
(approximately
1 0 seconds).
2. Press and release
the Exoosure button
until the
flashing
light is under
the
indicator for
the appropriate
exposure
range.
.
lf
power
is interrupted
while setting
copy exposures, no
change will
be
made to the
current exposures range.
Approximately
5 seconds after selecting the
appropriate indicator
the
exposure indicator will
go
out, the auto and
ready
indicators will
light, and
the new copy exposure range will
be set.
XC355 and XC356 Copiers
only
Note: Pressing
the Clear button will have no
effect during
this
procedure.
o
t
18

Xerox XC351 Specifications

General

Brand	Xerox
Model	XC351
Category	Copier
Language	English