51
52
ENEN
Clearing Home Environment
To improve the working eciency of your robot, put away any loose cords ,
rags, slippers, toys, etc.
Open the door of the room to be cleaned, and put the furniture in its
proper place to make more space.
To prevent the robot from not recognizing the area that needs to be
cleaned, do not stand in the front of the robot, threshold, hallway, or
narrow places.
Before cleaning, place a physical barrier at the edge of the stairs and
sofa to ensure safe and smooth operation of the robot.
> 1.5 m
> 0.3 m
> 0.5 m
> 0.5 m
Preparation Before Use
1. emove the protective matter
2.. I tall the side brush
Click
3.. Connect to a power outlet and st t charging
Place the base on level ground against the wall and connect it to a power
outlet. Place the robot onto the base to charge. The robot will turn on
automatically and begin charging. It is recommended to fully charge your
robot before rst-time use.
Place the base within
the best Wi-Fi range
Put away the power cord
into the cord storage slot
Note:
• Keep the immediate area 1.5m in front of the base and 0.5m to its both sides
clear of objects.
• Make sure that no objects might block the signaling area.
Note: Install the side brush until it clicks into place.
About the Auto-Empty Base
It is recommended that the robot set out from the base before cleaning. This
ensures that the robot returns to base smoothly. Do not move the base while
the robot is cleaning.
After the robot completes the cleaning task and automatically returns to the
base, the base will start auto-empty. More settings can be operated on the APP.
To Next Page
Loading...
Need help?
General
