59 60
ENEN
Clean the Laser Distance Sensor
/Edge Sensor
Clean the Charging Contact
Clean the Charging
Contacts and Dust Intake
Clean the High Precision 3D
Clean the Cli Sensor
Routine Maintenance
Note: Wet cloths can damage sensitive elements within the robot and base. Please use dry rags for cleaning.
Routine Maintenance
Replace the Dust Collection Bag
According to the status indicator (blinking orange) and app prompts, replace it with a new one when the dust collection bag is full. It is recommended to replace
the bag every 8-10 weeks.
1. Discard the dust collection bag 3. Install a new dust collection bag
Note: When taking out the dust collection bag, close the dust bag handle to
avoid dust leaking out.
2. Clean the lter 4. Close the upper cover of auto-empty base
Note: Do not close the base forcelly, if the upper cover of base cannot be
closed and the dust collection bag is not installed.
To Next Page
Loading...
Need help?
General
