Disconnecting
When a device's Bluetooth is disabled, or if the earbuds are out of range, the earbuds will
automatically enter awaiting connection mode. If the earbuds remain disconnected from
the device for 10 minutes, they will enter sleep mode. Wearing the earbuds again will wake
them up and they will enter awaiting connection mode.
Automatic connection
When the earbuds are in the charging case, opening the lid of the charging case will
automatically connect the earbuds to the most recently used Bluetooth device. If no
connection history is detected, or if the earbuds cannot successfully connect to any
Bluetooth device, the earbuds will automatically enter the awaiting connection mode.
Note: If the earbuds cannot automatically connect to a device, you will need to manually
connect the earbuds to the desired device via the device's Bluetooth settings.
Restoring factory settings
1. Place the earbuds into the charging case.
2. Press and hold the function button for at least ten seconds until the indicator turns white,
then release the button.
3. The factory settings of the earbuds have been restored, the connection history has
been cleared, the charging case's indicator blinks white, and the earbuds are in pairing
mode again.
Note: Due to the technical characteristics of Bluetooth, there may be occasional
intermittent loss of connection or sound in areas with dense electromagnetic signal
interference at 2.4 GHz.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
