Xilinx Kintex-7 FPGA KC705 Getting Started

6 www.xilinx.com KC705 Getting Started Guide
UG913 (v3.0.2) April 23, 2013
Chapter 1: Getting Started with the Kintex-7 FPGA KC705 Embedded Kit
• UG913, Getting Started with the Kintex-7 FPGA KC705 Embedded Kit (this
document)
• UG914
, AXI Interface Based KC705 Embedded Kit MicroBlaze Processor Subsystem
Hardware Tutorial
• UG915
, AXI Interface Based KC705 Embedded Kit MicroBlaze Processor Subsystem
Software Tutorial
• Reference designs and demonstrations:
• BIST - MicroBlaze processor subsystem
• Web server-based multi video streams demonstration system
What’s Available Online
• License for ISE Design Suite: Embedded Edition:
• w
ww.xilinx.com/support/licensing_solution_center.htm
• www.xilinx.com/tools/faq.htm
• Embedded kit home page with documentation and reference designs:
• w
ww.xilinx.com/products/boards-and-kits/DK-K7-EMBD-G.htm
• Technical support:
• w
ww.xilinx.com/support
Getting Started with the Video Demonstration
This Kintex-7 FPGA embedded kit comes with a video demonstration available on the
embedded kit home page. This demonstration can be run before installing any additional
tools to get an overview of the features of the KC705 evaluation board using a MicroBlaze
processor subsystem in the Kintex-7 (XC7K325T-FF900-2) FPGA.
Processor System Used for the Video Demonstration
The provided video demonstration uses a pre-built Kintex-7 FPGA design (Figure 1-1)
with these features:
• MicroBlaze processor
• External DDR3 SDRAM interface
• External flash memory interface
• On-chip memory (block RAM)
• Integrated Tri-Mode Ethernet MAC
• UART (connected from the KC705 board via the USB-UART connector)
• Interrupt controller (Intc) and timer
• GPIO (LCD, LEDs, buttons, switches, and rotary)
• Software-configurable XADC block

Xilinx Kintex-7 FPGA KC705 Specifications

General

Brand	Xilinx
Model	Kintex-7 FPGA KC705
Category	Motherboard
Language	English