Xilinx VC707 Getting Started

Getting Started with the VC707 Evaluation Kit www.xilinx.com 7
UG848 (v1.4.1) October 14, 2015
Preliminary Setup
3. Open the host computer Device Manager (Figure 1-2). In the Windows task bar, Click
Start, click Control Panel, and then click Device Manager.
4. Open UART properties. Expand Ports (COM & LPT), right-click Silicon Labs
CP210x USB to UART Bridge, and then click Properties.
5. In the properties window, select the Port Settings tab, verify the settings match the
values shown in Figure 1-3 and then click Advanced.
X-Ref Target - Figure 1-2
Figure 1-2: Device Manager
X-Ref Target - Figure 1-3
Figure 1-3: Port Settings
UG848_c1_02_071712
UG848_c1_03_071112
Send Feedback

Xilinx VC707 Specifications

General

Brand	Xilinx
Model	VC707
Category	Motherboard
Language	English