Xlink ITC-BT User Manual

12
Sometimes dial tone will be heard when an extension telephone is picked up to
continue an active call that was transferred from your cell phone to the XLink.
When this happens dialing
*
# can be used to connect the call.
NOTE:
• This feature may not be supported by all cell phones.
• The speed dial numbers for each line are determined by the individual cell
phones.
FORCE CALL CONNECTION
SPEED DIALING
You can also tell which line is ringing by looking at the line buttons on top of the
XLink. The blue light for a ringing line will flash with a unique cadence.
Some cell phones support speed dialing. The XLink allows you to access speed
dials 2 through 9 from extension telephones. Use the following steps:
1. Pick up an extension telephone. Listen for dial tone.
2. OPTIONAL: Select Line: 1 FLASH or 2 FLASH or 3 FLASH
3. Dial speed dial digit, 2 to 9
4. Dial #
Example: To activate speed dial 3, press 3 #

Xlink ITC-BT Specifications

General

Brand	Xlink
Model	ITC-BT
Category	Gateway
Language	English