28
MULTI-FLEX TECHNOLOGY™
XRAY’s innovative Multi-Flex Technology™ (MFT™) was originally
designed for 1/10 electric touring cars, and has resulted in some of
the most signifi cant milestones in touring car development in the past
few years.
The optional MFT™ 1-piece engine mounting system for the NT1 allows
you to set up and adjust the NT1 chassis stiffness in the engine bay to
suit various racing conditions or driving styles.
The standard 2-piece engine mount was designed and tested to allow
the right amount of chassis fl ex to suit most driving styles and racing
conditions. For specifi c racing conditions or driving styles, the middle of
the chassis can be additionally reinforced by installing optional
MFT™ 1-piece engine mount which features reinforcing legs both front
and rear, reinforcing the chassis and stiffening the fl ex. The MFT 1-piece
engine mount can be additional mounted using graphite braces to the
rear bulkheads and/or to the front holders next to the battery packs,
creating a very solid and stiff platform.
EFFECTS OF MFT™ ADJUSTMENT
MULTI-FLEX TECHNOLOGY™
ADJUSTING CHASSIS STIFFNESS WITH
MFT™ 1-PIECE ENGINE MOUNT
SOFTEST:
Standard lower engine mounts
STIFFEST:
MFT™ Lower Engine Mount
+ Brace Plates
Standard Lower Engine Mounts
Standard Lower Engine Mounts
MFT™ Lower Engine Mount
MFT™ Lower Engine Mount
+ Brace Plates
To Next Page
Loading...
Need help?
General
