Xray NT1 Set-Up Book

4
The terms “understeer” and “oversteer” appear throughout this manual. These terms describe a particular handling characteristic of the car.
Understeer
Also known as “push.”
A car understeers when the front wheels do not grip enough and the rear tires grip too much. This results in a front end that slides too much rather
than turning. A car that understeers is easier to drive, but it is slower than a car that oversteers slightly.
Oversteer
Also known as “loose.”
A car oversteers when the front wheels grip too much and the rear tires do not grip enough. This results in a rear end that slides too much.
Excessive oversteer causes the rear tires to “break loose” allowing the car to spin out.
TERMINOLOGY
SET-UP ORDER
The table below gives you a breakdown of the following:
• recommended order of setup
• car components to be attached/detached for a particular setting
• setup components to be used for a particular setting
We recommend setting up your NT1 chassis in the order indicated in the table below. The order of the chassis settings has been determined
as the most logical to set up your NT1 chassis properly and easily. Also, certain chassis settings must be made before others, as changing one setting
will impact another setting.
107715 RIDE HEIGHT GAUGE
• CNC-machined high-grade aluminum
• precision engraving
• measures ride height
108211 SET-UP BOARD DECAL
• self-adhesive set-up decal for 108201 Set-Up Board
• accurate, clear markings with 1mm grid for adjustment of 1/10 touring cars
• tough, smooth, liquid-resistant plastic surface
108201 SET-UP BOARD
• suitable for 1/10 R/C touring cars
• exceptionally fl at, warp-resistant surface
• very small, compact size
• provides perfectly fl at reference surface
for chassis set-up
SETTING UP THE XRAY NT1
107712 DROOP GAUGE
• CNC-machined high-grade aluminum
• precision engraving
• measures downstops when used with107702 Droop Gauge Support Blocks
✔ : Attach / Use ✘ : Detach / Do Not Use
SETTING Page CAR COMPONENTS SETUP COMPONENTS
Shocks Anti-roll
Bars
Wheels Setup
Stands
Droop
Gauge Set
Ride
Height
Gauge
Toe Gauge Flat Board
& Decal
1. Downstops
5
✘✘✘ ✔ ✔
2. Track-width
11
✔✔ ✔
3. Ride Height
13
✔✔✔ ✔✔
4. Camber
14
✔✘✘✔ ✔
5. Caster
16
6. Toe
17
✔✘✔ ✔✔
7. Tweak
20
✔✘ / ✔✔ ✔

Xray NT1 Specifications

General

Brand	Xray
Model	NT1
Category	Motorized Toy Car
Language	English