02 List of items
xTool F1 Pipe
L-shaped
positioning piece
Power adapter Power cable USB cable Triangular prism
working panel
Lint-free cloth
Key (spare part) Grease Material pack User manual
03 Meet your xTool F1
Emergency
stop switch
Logo indicator
Protective enclosure
Protective enclosure handle
Field lens protector
Removable baseplate
Smoke outlet
Key
Smoke purifier port
Reserved port
Field lens
Smoke outlet
Knob
Extension port
Framing button
USB port (Type-C)
Power switch
Power port
Product structure
Indicator description
Logo indicator
Knob indicator
Logo indicator Knob indicator Machine state
Solid on
Blinking
Going off
Not connected to the software
Network setting
Connected to the software
Task completed
Firmware updating
Exceptions occur
Invalid operation
Performing a task
Sleep state entered when no operation
is performed within 10 minutes
Solid white
Solid yellow
Solid blue
Solid green
Solid purple
Solid red
Blinking red
for 3 times
Solid blue
Blinking
white slowly
04 Use your xTool F1
4
Ensure that the key is inserted properly.
5
Remove the field lens protector.
2
Connect to a power supply.
Specifications
F1
User Manual | Benutzerhandbuch | Manual de Usuario
| Manuel d'utilisation | Manuale utente |
Gebruikershandleiding | Manual do Usuário |
| |
1
Preparations
Install the pipe.
If you need a desktop smoke purifier,
purchase one and connect it to xTool
F1 as instructed by the user manual.
3
Ensure that the emergency stop switch is not pressed.
xTool F1
Size
Connection mode
Input power
179 mm × 235 mm × 334 mm
Wi-Fi, USB
Product name
Internal working area
Maximum processing
speed
4,000 mm/s
100 mm × 100 mm
Laser module
455 nm blue-light laser
1064 nm infrared laser
Laser power
2 W (1064 nm)
10 W (455 nm)
3 4
To Next Page
Loading...
Need help?
General
