No rotary attachment is included in the pack.
If the connection cable included in the rotary attach-
ment pack is incompatible with xTool F1, you need to
purchase a compatible one.
1
2
3
If laser power attenuation occurs, for example, engraved
patterns are shallow or materials can't be cut as expected, the
field lens may get dirty. Clean it with the lint-free cloth
moistened with alcohol.
To prevent others from using your machine, you can remove
the key to lock the processing and related functions.
Operation access control
If errors or machine faults occur during material processing,
you can press the emergency stop switch to power off the
machine and stop the processing.
Emergency stop
You can turn the emergency stop switch to reset it.
You can insert the key to unlock the processing and related
functions.
During batch processing, the L-shaped positioning piece can help you to place a material in the same position every time.
Batch processing
If you can't move the protective enclosure up and down
smoothly, apply grease to the edges of the two sides.
05 Use Rotary Attachment
06 Maintenance
7 8
To Next Page
Loading...
Need help?
General
