Xtrem Bots SMART BOT User Manual

5
2. cautions and advices
Care and Maintenance:
- Always remove baeries from the toy when it is not being
used for a long period of me. (Transmier only)
- Wipe the toy gently with a clean cloth.
- Keep the toy away from direct heat.
- Do not submerge the toy into water that can damage the
electronic assemblies.
Special notes to adults:
- Before rst use, Read the user’s informaon together with
your child.
- This toy intended to be used in domesc area (house and
garden) only.
- Assembly should be performed under adult supervision
(changing baeries/ spare parts, trimming etc.).
- Parental guidance is recommended when installing or
replacing baeries.
- Do not change or modify anything on the toy.
Baery warnings:
- Non-rechargeable baeries are not to be recharged.
- Rechargeable baeries are to be removed before being
charged. (Transmier only)
- Rechargeable baeries are only to be charged under adult
supervision.
- Dierent types of baeries or new and used baeries are not
to be mixed. (Transmier only)
- Only baeries of the same or equivalent type as
recommended are to be used.
- Baeries are to be inserted with correct polarity.
- Exhausted baeries are to be removed from the toy.
(Transmier only)
- The supply terminals are not to be short-circuited.
- Do not mix old and new baeries. (Transmier only)
- Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) baeries. (Transmier only)
This toy is equipped with a LiPo rechargeable baery,
please pay aenon to the following cauons for safety use:
- Do not dispose the baery in re or heat.
- Do not use or leave the baery near a heat source such as
re or heater.
- Do not strike or throw the baery against hard surface.
- Do not immerse the baery in water, and keep the baery in
a cool dry environment.
- When recharging, only use the baery charger specically
for that purpose.
- Do not over-discharge the baery.
- Do not connect the baery to an electrical outlet.
- Do not directly solder the baery and pierce the baery with
a nail or other sharp object.
- Do not transport or store the baery together with metal
objects such as necklaces, hairpins etc.
- Do not disassemble or alter the baery.
- Charge the baery every 6 months.
- Toy baey inside can’t be replaced
Notes:
- The toy may malfuncon under electrostac discharge
interference. If the toy does not respond, reset it.
- Use new alkaline baeries in this toy to obtain best
performance.
- This toy must only be used with the recommended charger.
Baeries requirements (Transmier):
Power supply:
Characteriscs: DC 3V
Quality and type: 2 x 1,5V “AA”/LR6 (not
included)
Baery requirements (Robot):
Power supply:
Characteriscs: DC 3.7V
Quality and type: 1x3.7V Li-Po rechargeable battery
(included)
Capacity: 600 mAh
The crossed-out dustbin symbol indicates
that baeries, rechargeable baeries,
buon cells, baery packs, etc. must not
be put in the household waste. Baeries
are harmful to health and the environment. Please
help to protect the environment from health risks. If
the toy is out of use, please use common household
tool to break the product for built-in rechargeable
baery operated toy or unscrew the baery door
for replaceable baery operated toy, then take
the baery out from the toy. Dispose of baery
in accordance with your local baery recycling or
disposal laws.
WEEE
When this appliance is out of use, please
remove all baeries and dispose of them
separately. Bring electrical appliances
to the local collecng points for waste
electrical and electronic equipment.
Other components can be disposed of in
domesc refuse.

Xtrem Bots SMART BOT Specifications

General

Brand	Xtrem Bots
Model	SMART BOT
Category	Robotics
Language	English