7
New Two CTCSS Tone Pager Function
When using the FT-4XR/XE transceivers with a group of friends, setting the two CTCSS
tone personal codes allows calling just the specific stations.
Using the Pager Function
Press and hold
the Function key
→
Press the
p
or
q
key
→
Press the Function key
(Entering the Set Mode) (Selecting "36 SQL.TYP")
1. Press the [
p
] or [
q
] to select the “PAGER”.
2. Press the PTT switch to save the setting and return to
the normal operation.
•
The new pager function is activated.
PAGER icon
Setting the Code for Your Station
Set the “pager code” to be called by other stations.
Press and hold
the Function key
→
Press the
p
or
q
key
→
Press the Function key
(Entering the Set Mode) (Selecting "23 PAG.CDR")
1. Press the numeric key to input the first element of the
code from 01 to 50.
•
The icon is moved to the second element of the code.
2. Press the numeric key to input the second element of
the code from 01 to 50.
•
The first and second element of the code may not be
set to the same code.
•
Press the [
p
] or [
q
] to switch the icon between first
code and second code.
3. Press the PTT switch to save the setting and return to normal operation.
z
The reverse combination works as the same code, that is “05 47” is the same as “47 05”.
z
If the same code is specified for all individuals, all the individuals can be called at the same
time.
z
The default code is “05 47”.
z
When receiving the signals, the intermittent sound of the tone signal may be heard slightly.
To Next Page
Loading...
Need help?
General
