Yaesu FT-891 User Manual

23FT-891 Operating Manual
About the Display
Operation Frequency
Operating Mode
(see table below)
VFO-B data
Clarifier operation
Mode Meter
Meters
(see table below)
Icons
(see table below)
VFO-B
ø Display examples of the Function key （in the case of Noise Blanker）
: Function “OFF”.
: Function “ON”.
: Function “ON” and then turn the

MULTI function knob to change the
assigned feature setting.
Operating Mode Indicators Meters
/
VFO-A
Displays transmitter output power
/
Memory Channel Number
Displays ALC voltage
/
Programmable Memory Scanning
Displays Standing Wave Ratio
/
Operating with the Quick Memory
Bank
Displays the speech processor
compression level
/
Memory tune
Displays the drain current of the
final stage FET transistors
/
Recalling the emergency contact
frequency
ø The Indication of each meter is not precise but
is a relative value and a rough indication.
Icons
Antenna Tuner Running split operation
Active Tuning Antenna System The receiver preamplifier is OFF
Connecting the linear amplifier The attenuator is in use
The VOX function is in use The Narrow IF DSP filter is in use
The Speech Processor function is
in use
The noise blanker is in use
MAIN DIAL at a higher step rate.
The Monitor function is in use
Function Key Status
ø
(
see page 45
)
Clarifier
(
see page 33
)
Lock Feature Active
(
see page 32
)

Yaesu FT-891 Specifications

General

Brand	Yaesu
Model	FT-891
Category	Transceiver
Language	English