114
Optional FH-2 Control
With the optional remote-control keypad FH-2 voice messages may be recorded and transmitted (Voice
Memory). The FH-2 is also the control of the Contest Memory Keyer during CW operation.
● SSB / AM / FM modes have ve voice memory channels (20 seconds each) for storage and playback,
of voice recordings (page 54).
● The CW Memory Keyer has 5 channels each for the MESSAGE Memory and the TEXT Memory (page
61).
Voice Memory: 5 Memory
Channels for the Memory Keyer
In the case of Voice Memory, up to 20 seconds of
audio may be stored on each channel.
“MESSAGE Memory” and “TEXT Memory” are
available for the Contest Memory Keyer.
Each “MESSAGE Memory” channel is capable of
retaining a 50-character CW message using the
PARIS standard for characters and word length.
Each “TEXT Memory” channel is capable of retain-
ing a maximum of 50 characters.
Cursor Keys
When programming the Contest Memory Keyer,
these keys are used to move the cursor and select
the text characters.
The cursor may be moved in 4 different directions
(up/down/right/left).
NOTE: Usually, these keys are used for changing
the VFO frequency. Press the [
p
]/[
q
] keys to
change the frequency in the same increments as
the microphone [UP]/[DWN] switches. Press the
[
t
]/[
u
] keys to change the frequency by 100 kHz
steps.
LOCK Switch
The FH-2 key keys may be locked by setting this
switch to “ON”.
MEM Key
Press this key to store either a Voice Memory, or a
Contest Keyer Memory.
DEC Key
When utilizing the sequential contest number
capability of the Contest Keyer, press this key to
decrement (decrease) the current Contest Number
by one digit (i.e. to back up from #198 to #197,
etc.).
*No function is assigned to the [P/B] key.
To Next Page
Loading...
Need help?
General
