4. Remove the press and
remove the loose flange lock-
ing ring and the advance
band (four-piece wheel only)
from the tire and wheel
assembly.
5. Push the TBS toward the
inside of the tire to remove it.
Install Tire on Wheel
WARNING
Damage to the tire and wheel assembly and injury or
death can occur if you do not do the following proce-
dures:
•
Clean and inspect all parts of the wheel before
installing the tire.
• DO NOT use any damaged or repaired wheel parts.
• Make sure that all parts of the wheel are the correct
parts for that wheel assembly.
• DO NOT mix parts between different types or manu-
facturers of wheels.
• DO NOT mix types of tires, type of tire tread, or
wheel assemblies of different manufacturers on any
one lift truck.
WARNING
Do not use a steel hammer on the wheel. Use a rubber,
lead, plastic, or brass hammer to put parts together.
Maintenance
186
To Next Page
Loading...
Need help?
General
