– 11 –
7. Throttle Body Clamp Set (14B-1351A-70)
This part is used to enhance maintenance performance of the throttle body. Before using it, cut
off the protrusion for positioning bands at the cabjoint.
The part has a collar to prevent over-tightening. In normal cases, the part will not be tightened
till it reaches to the collar. Just manually tighten it.
Make sure to put a new band through a M5 x 0.8 tap before using it.
Parts List
No. PART No. PART NAME Q’TY REMARKS
1 CLAMP COMP. 1 Right side (3-4)
2 CLAMP COMP. 1 Left side (1-2)
2
1
Cut it off
To Next Page
Loading...
Need help?
General
