PERIODIC MAINTENANCE AND MINOR REPAIR
6-27
6
EAU00825
Fuse replacement
The fuses are located behind panel A.
(See page 6-6 for panel removal proce-
dures.)
If a fuse is blown, turn off the main
switch and the switch of the circuit in
question. Install a new fuse of proper
amperage. Turn on the switches and
see if the electrical device operates. If
the fuse immediately blows again, con-
sult a Yamaha dealer.
EC000103
CAUTION:
@
Do not use fuses of higher amper-
age rating than those recommend-
ed. Substitution of a fuse of
improper rating can cause extensive
electrical system damage and pos-
sibly a fire.
@
1. Fuse block
2. Main fuse
3. Spare fuse
1. Ignition fuse
2. Signaling system fuse
3. Headlight fuse
4. Carburetor heater fuse
5. Spare fuse
Specified fuses:
Main fuse: 30 A
Ignition fuse: 10 A
Signaling system fuse: 10 A
Headlight fuse: 15 A
Carburetor heater fuse: 15 A
E_4xs_Periodic.fm Page 27 Tuesday, November 30, 1999 2:36 PM
To Next Page
Loading...
Need help?
General
