Yamaha CSD-R7 User Manual

RIVAGE PM7 System Setup Guide
38
Setting the word clock
The entire system must synchronize to the same word
clock.
1. Press the WORD CLOCK button in the SETUP
screen.
2. Select a clock source.
The initial value is 96 kHz.
If the unit is operating properly with the selected
word clock, the indicator above the corresponding
button will turn light blue, and the upper-left corner
of the MASTER CLOCK SELECT field will indicate
the clock rate.
3. To close the WORD CLOCK popup window,
press the “x” symbol located in the upper
right.
The system will return to the SETUP screen.
Assigning channels to the
TWINLANe network
On the DSP and I/O rack, you can select channels to be
output to the TWINLANe network, and make settings to
reserve certain bandwidth on the network.
1. Press the SYSTEM CONFIG button in the
SETUP screen.
2. Press the DSP button.
The SYSTEM CONFIG [DSP] popup window will
appear.
3. Press the Channel assign popup button.
For this example, select STEREO.
The TWINLANe CONFIGURATION popup
window will appear.

Yamaha CSD-R7 Specifications

General

Brand	Yamaha
Model	CSD-R7
Category	Music Mixer
Language	English