EasyManuals Logo
Home>Yamaha>Boat>FX High Output WaveRunner 2008

Yamaha FX High Output WaveRunner 2008 User Manual

Yamaha FX High Output WaveRunner 2008
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
Operation
67
(4) Push the start switch (green button), and
then release it as soon as the engine
starts to run.
NOTE:
The engine will not start if the throttle lever is
squeezed.
CAUTION:
ECJ00480
Never push the start switch while the en-
gine is running.
Do not operate the start switch for more
than 5 seconds, otherwise the battery
will be discharged and the engine will
not start. Also, the starter motor could
be damaged. If the engine does not start
in 5 seconds, release the start switch,
wait 15 seconds, and then try again.
EJU32860
Stopping the engine
To stop the engine, release the throttle lever,
and then push the engine stop switch (red
button).
WARNING
EWJ00600
You need throttle to steer. Shutting the en-
gine off can cause you to hit an obstacle
you are attempting to avoid. A collision
could result in severe injury or death.
EJU32881
Leaving the watercraft
If leaving the watercraft, select the lock mode
of the Yamaha Security System and remove
the engine shut-off cord to reduce the chance
of accidental starting or unauthorized use by
children or others. (See page 38 for Yamaha
Security System lock and unlock mode selec-
tion procedures.)
UF1X12E0.book Page 67 Thursday, June 14, 2007 10:24 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha FX High Output WaveRunner 2008 and is the answer not in the manual?

Yamaha FX High Output WaveRunner 2008 Specifications

General IconGeneral
BrandYamaha
ModelFX High Output WaveRunner 2008
CategoryBoat
LanguageEnglish

Related product manuals