Equipment operation
57
EJU42390
Fire extinguisher holder and cover
The fire extinguisher holder and cover are lo-
cated in the bow storage compartment.
To use the fire extinguisher holder and cover:
(1) Pull the hood latch rearward, and then lift
up the rear of the hood.
(2) Unhook the band and remove the fire ex-
tinguisher cover.
(3) Place the fire extinguisher in the holder,
and then place the cover over the fire ex-
tinguisher.
(4) Securely fasten the cover and the fire ex-
tinguisher with the band.
(5) Push the rear of the hood down to se-
curely lock it in place. Make sure that the
hood is securely closed before using the
watercraft.
1 Hood latch
1 Fire extinguisher holder and cover
2 Band
UF2S71E0.book Page 57 Tuesday, August 21, 2012 2:33 PM
To Next Page
Loading...
Need help?
General