1
2
3
4
5
6
7
8
9
10
11
8-9
G19E
MAINTENANCE
Wheel Replacement
To remove and install a wheel on
your golf car:
1. With the wheels blocked to pre-
vent the golf car from moving,
loosen the wheel nuts.
2. Elevate the golf car with a jack
and remove the wheel nuts and
the wheel.
3. Reverse the removal steps when
installing the wheel.
Wheel nut tightening torque:
58 ft
.
lb (80 Nm, 8.0 m
.
kg)
Brake Adjustment
The brakes on your golf car are self-
adjusting.
Before you operate the car, press
down on the brake pedal several
times to make sure the brakes are
functioning properly.
Consult your Yamaha dealer before
using your golf car if you suspect
brake problems. Brake failure
could result in a serious accident.
To Next Page
Loading...
Need help?
General
